{"title":"Soraa Vivid","description":"\u003ch2\u003eWhat Makes VIVID Different From Standard LEDs\u003c\/h2\u003e\n\u003ch3\u003eFull-Spectrum VP3 LED Technology\u003c\/h3\u003e\n\u003cp\u003eSoraa VIVID is a full-spectrum LED lamp line built to span the full visible spectrum, from violet through deep red, using patented VP3 LED technology on a GaN on GaN platform. The difference from a standard LED is the violet-emission gap. Standard blue-pump LEDs skip part of the violet spectrum, which can make whites look dull and reds fall flat. VIVID's VP3 technology is engineered to fill that gap for daylight-like rendering, and that is the whole reason to reach for this line over a generic bulb.\u003c\/p\u003e\n\n\u003ch3\u003e95 CRI, R9 95, and Rw 100\u003c\/h3\u003e\n\u003cp\u003eThe result shows up in the two places the eye notices first. Whites read clean, so white fabrics, teeth, paper, and cosmetics look natural rather than washed out, rated Rw 100. Deep reds stay rich, so wood, wine, and skin tones hold their warmth, rated R9 95. As a 95 CRI LED lamp rated R9 95, Rw 100, Rf 90, and Rg 100, VIVID gives a fuller, more consistent picture than a lamp that only quotes a single CRI number. Narrow 10-degree spot models are also \u003cstrong\u003e\u003ca href=\"https:\/\/www.payless-4-lighting.com\/collections\/soraa-snap-accessories\"\u003eSNAP accessories\u003c\/a\u003e\u003c\/strong\u003e compatible, so you can control beam and color after install without giving up any of that rendering.\u003c\/p\u003e\n\u003cp\u003eSoraa publishes VIVID's color numbers so you can compare at a glance - this is the Natural White rendering the line is known for:\u003c\/p\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eMetric\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eVIVID rating\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eWhat it tells you\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eCRI (Ra)\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e95\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eOverall color accuracy\u003c\/p\u003e\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eR9 (deep red)\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e95\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eRich reds in wood, food, and skin\u003c\/p\u003e\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eRw (whites)\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e100\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eClean, natural whites\u003c\/p\u003e\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eTM-30 (Rf \/ Rg)\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eRf 90 \/ Rg 100\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eFidelity and saturation balance\u003c\/p\u003e\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\n\u003ch2\u003eWhere VIVID Lamps Are Used\u003c\/h2\u003e\n\u003ch3\u003eGalleries, Retail, and Hospitality\u003c\/h3\u003e\n\u003cp\u003eVIVID earns its place anywhere the look of a product or space is the point. In galleries and museums, it shows artwork's true tones without a color cast. In jewelry and clothing displays, whites stay crisp while metals and fabrics read accurately. Restaurants and hotels use it so food, wood, and skin tones look warm and appetizing. In showrooms and design-led homes, it keeps paint, stone, and finishes looking the way they were chosen.\u003c\/p\u003e\n\n\u003ch3\u003eStudios, Medical, and Color Matching\u003c\/h3\u003e\n\u003cp\u003eIt also flatters printed materials and packaging in studios and print shops, where a proof has to match once it reaches store lighting. And in dental, cosmetic, and medical settings, accurate skin and tissue tones help staff and clients judge results much as they would in daylight. When one project mixes several of these needs, a single VIVID color standard keeps every fixture consistent from room to room, which is easier to specify and easier to maintain than matching lamps from different lines later.\u003c\/p\u003e\n\n\u003ch3\u003eWhere Color Accuracy Pays Off\u003c\/h3\u003e\n\u003cp\u003eThe through-line is that VIVID is specified wherever a wrong color would cost something - a sale, a diagnosis, a design sign-off, or a guest's impression of a room. That is why it turns up in high-traffic, judgment-heavy settings rather than back-of-house. A boutique that lights a fitting room with VIVID sees fewer returns because shoppers judge color correctly the first time. A restaurant that plates food under VIVID serves it the way the chef intended. A dealer showroom that lights paint and trim under VIVID lets a buyer choose a finish that still looks right in daylight. In each case, the lamp is doing quiet work that only shows up when it is missing.\u003c\/p\u003e\n\n\u003ch2\u003eSoraa VIVID vs. Brilliant HL - Which Do You Need\u003c\/h2\u003e\n\u003ch3\u003eVIVID for Color, Brilliant HL for Output\u003c\/h3\u003e\n\u003cp\u003eBoth lines share Soraa's build quality; they differ in priority. Choose VIVID when color accuracy leads. Choose \u003cstrong\u003e\u003ca href=\"https:\/\/www.payless-4-lighting.com\/collections\/soraa-brilliant-hl\"\u003eSoraa Brilliant HL\u003c\/a\u003e\u003c\/strong\u003e when you need more lumens at a lower cost. Compare the full \u003cstrong\u003e\u003ca href=\"https:\/\/www.payless-4-lighting.com\/collections\/soraa\"\u003eSoraa range\u003c\/a\u003e\u003c\/strong\u003e if you are specifying a mixed project where some rooms are color-critical and others are not.\u003c\/p\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eYour priority\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003e\u003cstrong\u003eBest pick\u003c\/strong\u003e\u003c\/p\u003e\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eColor-critical spaces - galleries, jewelry, fine dining, showrooms\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eSoraa VIVID\u003c\/p\u003e\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eBrightness-first, lower cost - general retail, offices, corridors, landscape\u003c\/p\u003e\u003c\/td\u003e\n    \u003ctd colspan=\"1\" rowspan=\"1\"\u003e\u003cp\u003eSoraa Brilliant HL\u003c\/p\u003e\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMixing Tiers on One Project\u003c\/h3\u003e\n\u003cp\u003eA common approach on a large job is to run VIVID on the feature and display areas and Brilliant HL on back-of-house and circulation, keeping color where it counts and cost down everywhere else. Because both come in \u003cstrong\u003e\u003ca href=\"https:\/\/www.payless-4-lighting.com\/collections\/soraa-mr16-gu10\"\u003eMR16 GU10\u003c\/a\u003e\u003c\/strong\u003e, \u003cstrong\u003e\u003ca href=\"https:\/\/www.payless-4-lighting.com\/collections\/soraa-mr16-gu5-3\"\u003eGU5.3\u003c\/a\u003e\u003c\/strong\u003e, and \u003cstrong\u003e\u003ca href=\"https:\/\/www.payless-4-lighting.com\/collections\/soraa-par\"\u003ePAR\u003c\/a\u003e\u003c\/strong\u003e bodies, the fixtures stay the same and only the tier changes.\u003c\/p\u003e\n\n\u003ch3\u003eThe Safe Default for Feature Areas\u003c\/h3\u003e\n\u003cp\u003eIf a space could go either way, the safe default is to spec VIVID for anything a customer looks at closely and Brilliant HL for everything else, because it is easier to justify color accuracy on a feature wall than to explain a color miss after install. Both tiers carry the same build quality and drop into the same fixtures, so the decision is only ever about priority, never about compatibility.\u003c\/p\u003e\n\n\u003ch2\u003eVIVID Across Every Form Factor\u003c\/h2\u003e\n\u003cp\u003eOne color standard runs across the whole VIVID line, so a project can mix bases and shapes without shifting color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVIVID MR16 and PAR\u003c\/strong\u003e - spots and floods in GU10, GU5.3, and PAR20 to PAR38 for accent and general directional light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVIVID AR111 and Warm Dim\u003c\/strong\u003e - 12V directional lamps plus Warm Dim models that dim from 3000K down to 1800K for evening ambiance.\u003c\/p\u003e","products":[{"product_id":"bulbrite-777797","title":"Bulbrite 777797 AC-AM-0020-00-S1 SORAA SNAP AIMABLE (PAIR)","description":"\u003cp\u003eBulbrite 777797 AC-AM-0020-00-S1 SORAA SNAP AIMABLE (PAIR)\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119045374123,"sku":null,"price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777797.jpg?v=1717978002"},{"product_id":"bulbrite-777798","title":"Bulbrite 777798 AC-EN-0001-00-S1 SORAA SNAP COLOR ENHANCER","description":"\u003cp\u003eBulbrite 777798 AC-EN-0001-00-S1 SORAA SNAP COLOR ENHANCER\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119045406891,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777798.jpg?v=1717978065"},{"product_id":"bulbrite-777799","title":"Bulbrite 777799 AC-CL-0000-00-S1 SORAA SNAP COLOR FILTER - CLEAR","description":"\u003cp\u003eBulbrite 777799 AC-CL-0000-00-S1 SORAA SNAP COLOR FILTER - CLEAR\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119045439659,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777799.jpg?v=1717978103"},{"product_id":"bulbrite-777800","title":"Bulbrite 777800 AC-CC-0001-00-S1 SORAA SNAP COLOR CHANGING CTO 1\/4","description":"\u003cp\u003eBulbrite 777800 AC-CC-0001-00-S1 SORAA SNAP COLOR CHANGING CTO 1\/4\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119045505195,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777800.jpg?v=1717978146"},{"product_id":"bulbrite-777801","title":"Bulbrite 777801 AC-CC-0002-00-S1 SORAA SNAP COLOR CHANGING CTO 1\/2","description":"\u003cp\u003eBulbrite 777801 AC-CC-0002-00-S1 SORAA SNAP COLOR CHANGING CTO 1\/2\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119045537963,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777801.jpg?v=1717978182"},{"product_id":"bulbrite-777802","title":"Bulbrite 777802 AC-CC-0003-00-S1 SORAA SNAP COLOR CHANGING CTO 3\/4","description":"\u003cp\u003eBulbrite 777802 AC-CC-0003-00-S1 SORAA SNAP COLOR CHANGING CTO 3\/4\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119045570731,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777802.jpg?v=1717978219"},{"product_id":"bulbrite-777806","title":"Bulbrite 777806 AC-GE-1025-00-S1 SORAA SNAP SHAPING ANGLE 10° X 25°","description":"\u003cp\u003eBulbrite 777806 AC-GE-1025-00-S1 SORAA SNAP SHAPING ANGLE 10° X 25°\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119045734571,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777806.jpg?v=1717978376"},{"product_id":"bulbrite-777807","title":"Bulbrite 777807 AC-GE-1036-00-S1 SORAA SNAP SHAPING ANGLE 10° X 36°","description":"\u003cp\u003eBulbrite 777807 AC-GE-1036-00-S1 SORAA SNAP SHAPING ANGLE 10° X 36°\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119045767339,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777807.jpg?v=1717978406"},{"product_id":"bulbrite-777809","title":"Bulbrite 777809 AC-FR-3636-00-S1 SORAA SNAP SHAPING SQUARE 36° X 36°","description":"\u003cp\u003eBulbrite 777809 AC-FR-3636-00-S1 SORAA SNAP SHAPING SQUARE 36° X 36°\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119045996715,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777809.jpg?v=1717978448"},{"product_id":"bulbrite-777812","title":"Bulbrite 777812 AC-GC-1717-00-S1 SORAA SNAP BEAM SPREADING TO 17°","description":"\u003cp\u003eBulbrite 777812 AC-GC-1717-00-S1 SORAA SNAP BEAM SPREADING TO 17°\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119046029483,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777812.jpg?v=1717978490"},{"product_id":"bulbrite-777813","title":"Bulbrite 777813 AC-GE-1060-00-S1 SORAA SNAP SHAPING ANGLE 10° X 60°","description":"\u003cp\u003eBulbrite 777813 AC-GE-1060-00-S1 SORAA SNAP SHAPING ANGLE 10° X 60°\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119046062251,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777813.jpg?v=1717978529"},{"product_id":"bulbrite-777814","title":"Bulbrite 777814 AC-E-AM-0020-00-S1 SORAA SNAP LARGE AIMABLE (PAIR)","description":"\u003cp\u003eBulbrite 777814 AC-E-AM-0020-00-S1 SORAA SNAP LARGE AIMABLE (PAIR)\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119046324395,"sku":null,"price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777814.jpg?v=1717978598"},{"product_id":"bulbrite-777815","title":"Bulbrite 777815 AC-E-EN-0001-00-S1 SORAA SNAP LARGE COLOR ENHANCER","description":"\u003cp\u003eBulbrite 777815 AC-E-EN-0001-00-S1 SORAA SNAP LARGE COLOR ENHANCER\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119046488235,"sku":null,"price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777798.jpg?v=1717978065"},{"product_id":"bulbrite-777816","title":"Bulbrite 777816 AC-E-CL-0000-00-S1 SORAA SNAP LARGE COLOR FILTER - CLEAR","description":"\u003cp\u003eBulbrite 777816 AC-E-CL-0000-00-S1 SORAA SNAP LARGE COLOR FILTER - CLEAR\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119046521003,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777799.jpg?v=1717978103"},{"product_id":"bulbrite-777817","title":"Bulbrite 777817 AC-E-GC-1717-00-S1 SORAA SNAP LARGE BEAM SPREADING TO 17°","description":"\u003cp\u003eBulbrite 777817 AC-E-GC-1717-00-S1 SORAA SNAP LARGE BEAM SPREADING TO 17°\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119046553771,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777803.jpg?v=1717978267"},{"product_id":"bulbrite-777819","title":"Bulbrite 777819 AC-E-GE-1060-00-S1 SORAA SNAP LARGE SHAPING ANGLE 10° X 60°","description":"\u003cp\u003eBulbrite 777819 AC-E-GE-1060-00-S1 SORAA SNAP LARGE SHAPING ANGLE 10° X 60°\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119046586539,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777804.jpg?v=1717978307"},{"product_id":"bulbrite-777820","title":"Bulbrite 777820 AC-E-CC-0001-00-S1 SORAA SNAP LARGE COLOR CHANGING CTO 1\/4","description":"\u003cp\u003eBulbrite 777820 AC-E-CC-0001-00-S1 SORAA SNAP LARGE COLOR CHANGING CTO 1\/4\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119047241899,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777800.jpg?v=1717978146"},{"product_id":"bulbrite-777821","title":"Bulbrite 777821 AC-E-CC-0002-00-S1 SORAA SNAP LARGE COLOR CHANGING CTO 1\/2","description":"\u003cp\u003eBulbrite 777821 AC-E-CC-0002-00-S1 SORAA SNAP LARGE COLOR CHANGING CTO 1\/2\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119047307435,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777801.jpg?v=1717978182"},{"product_id":"bulbrite-777822","title":"Bulbrite 777822 AC-E-CC-0003-00-S1 SORAA SNAP LARGE COLOR CHANGING CTO 3\/4","description":"\u003cp\u003eBulbrite 777822 AC-E-CC-0003-00-S1 SORAA SNAP LARGE COLOR CHANGING CTO 3\/4\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119047372971,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777802.jpg?v=1717978219"},{"product_id":"bulbrite-777823","title":"Bulbrite 777823 AC-E-GC-2525-00-S1 SORAA SNAP LARGE BEAM SPREADING TO 25°","description":"\u003cp\u003eBulbrite 777823 AC-E-GC-2525-00-S1 SORAA SNAP LARGE BEAM SPREADING TO 25°\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119047405739,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777805.jpg?v=1717978346"},{"product_id":"bulbrite-777824","title":"Bulbrite 777824 AC-E-GC-3636-00-S1 SORAA SNAP LARGE BEAM SPREADING TO 36°","description":"\u003cp\u003eBulbrite 777824 AC-E-GC-3636-00-S1 SORAA SNAP LARGE BEAM SPREADING TO 36°\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119047471275,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777806.jpg?v=1717978376"},{"product_id":"bulbrite-777825","title":"Bulbrite 777825 AC-E-GC-6060-00-S1 SORAA SNAP LARGE BEAM SPREADING TO 60°","description":"\u003cp\u003eBulbrite 777825 AC-E-GC-6060-00-S1 SORAA SNAP LARGE BEAM SPREADING TO 60°\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119047733419,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777809.jpg?v=1717978448"},{"product_id":"bulbrite-777827","title":"Bulbrite 777827 AC-E-GE-1036-00-S1 SORAA SNAP LARGE SHAPING ANGLE 10° X 36°","description":"\u003cp\u003eBulbrite 777827 AC-E-GE-1036-00-S1 SORAA SNAP LARGE SHAPING ANGLE 10° X 36°\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119047766187,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777812.jpg?v=1717978490"},{"product_id":"bulbrite-777828","title":"Bulbrite 777828 AC-E-FR-3636-00-S1 SORAA SNAP LARGE SHAPING SQUARE 36° X 36°","description":"\u003cp\u003eBulbrite 777828 AC-E-FR-3636-00-S1 SORAA SNAP LARGE SHAPING SQUARE 36° X 36°\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119047864491,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777812.jpg?v=1717978490"},{"product_id":"bulbrite-777830","title":"Bulbrite 777830 AC-E-LU-4040-00-S1 SORAA SNAP LARGE LOUVER","description":"\u003cp\u003eBulbrite 777830 AC-E-LU-4040-00-S1 SORAA SNAP LARGE LOUVER\u003c\/p\u003e","brand":"BULBRITE","offers":[{"title":"Default Title","offer_id":44119047930027,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/777830.jpg?v=1717978987"},{"product_id":"soraa-191","title":"Soraa AC-E-CC-0001-00-S1 SORAA SNAP 4 inch diameter  Color Filter 1\/4 CTO 3000K to 2700K","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 4-inch Color Filter 1\/4 CTO shifts a narrow-spot Soraa lamp's correlated color temperature from 3000K down to 2700K for a warmer, more candle-like output. The 37-mired CCT shifter is built for hospitality and restaurant applications where warm dimming aesthetics are required, and lets a single 3000K lamp SKU cover multiple color temperatures across a venue. Lumen transmissivity through the filter is 90%. The 84 mm diameter, 3.1 mm-thick lens snaps onto any 4-inch Soraa SNAP-compatible lamp via the self-centering magnetic interconnect with a 1.0 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSHIFTS 3000K TO 2700K\u003c\/strong\u003e — 1\/4 CTO color filter shifts a 3000K Soraa narrow-spot lamp down to 2700K for a warmer, more candle-like output without changing the lamp or recalibrating the fixture.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e37 MIRED SHIFT\u003c\/strong\u003e — Calibrated 37-mired shift, precise enough for hospitality and restaurant brands that specify their warm-end correlated color temperature down to a target spec.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWARM-DIM AESTHETIC\u003c\/strong\u003e — Use in hospitality and restaurant applications to simulate warm-dimming behavior and create custom colors for festive occasions or seasonal brand campaigns.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eONE LAMP, MULTIPLE CCTS\u003c\/strong\u003e — A single 3000K Soraa lamp SKU can be used to deliver multiple color temperatures across a venue by stacking different CCT shifter SNAPs on different fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the filter so the warm-shifted output stays usable for accent, dining, and lounge zones.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any 4-inch Soraa SNAP-compatible lamp with a 1.0 lb-F holding force — no clips, no tools, no field modifications.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACK CCT SHIFTER FIRST\u003c\/strong\u003e — When combining with beam-shaping SNAPs, place the CCT shifter on the lamp first and add the beam-shaping accessory on top for the cleanest stacked optical result.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492855632043,"sku":null,"price":13.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-CC-0001-00-S1_a1d5e0b1-4198-4f7e-91c2-892349dbb791.jpg?v=1777248700"},{"product_id":"soraa-192","title":"Soraa AC-E-CC-0002-00-S1 SORAA SNAP 4 inch diameter  Color Filter 1\/2 CTO 3000K to 2400K","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 4-inch Color Filter 1\/2 CTO shifts a narrow-spot Soraa lamp's correlated color temperature from 3000K down to 2400K for a warmer, more candle-like output. The 83-mired CCT shifter is built for hospitality and restaurant applications where warm dimming aesthetics are required, and lets a single 3000K lamp SKU cover multiple color temperatures across a venue. Lumen transmissivity through the filter is 75%. The 84 mm diameter, 3.1 mm-thick lens snaps onto any 4-inch Soraa SNAP-compatible lamp via the self-centering magnetic interconnect with a 1.0 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSHIFTS 3000K TO 2400K\u003c\/strong\u003e — 1\/2 CTO color filter shifts a 3000K Soraa narrow-spot lamp down to 2400K for a warmer, more candle-like output without changing the lamp or recalibrating the fixture.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e83 MIRED SHIFT\u003c\/strong\u003e — Calibrated 83-mired shift, precise enough for hospitality and restaurant brands that specify their warm-end correlated color temperature down to a target spec.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWARM-DIM AESTHETIC\u003c\/strong\u003e — Use in hospitality and restaurant applications to simulate warm-dimming behavior and create custom colors for festive occasions or seasonal brand campaigns.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eONE LAMP, MULTIPLE CCTS\u003c\/strong\u003e — A single 3000K Soraa lamp SKU can be used to deliver multiple color temperatures across a venue by stacking different CCT shifter SNAPs on different fixtures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 75% of the lamp's lumens through the filter so the warm-shifted output stays usable for accent, dining, and lounge zones.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any 4-inch Soraa SNAP-compatible lamp with a 1.0 lb-F holding force — no clips, no tools, no field modifications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSTACK CCT SHIFTER FIRST\u003c\/strong\u003e — When combining with beam-shaping SNAPs, place the CCT shifter on the lamp first and add the beam-shaping accessory on top for the cleanest stacked optical result.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492855664811,"sku":null,"price":13.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-CC-0002-00-S1_babad125-1a72-4dd3-b9a8-3c05353955c6.jpg?v=1777248679"},{"product_id":"soraa-193","title":"Soraa AC-E-CC-0003-00-S1 SORAA SNAP 4 inch diameter  Color Filter 3\/4 CTO 3000K to 2200K","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 4-inch Color Filter 3\/4 CTO shifts a narrow-spot Soraa lamp's correlated color temperature from 3000K down to 2200K for a warmer, more candle-like output. The 120-mired CCT shifter is built for hospitality and restaurant applications where warm dimming aesthetics are required, and lets a single 3000K lamp SKU cover multiple color temperatures across a venue. Lumen transmissivity through the filter is 60%. The 84 mm diameter, 3.1 mm-thick lens snaps onto any 4-inch Soraa SNAP-compatible lamp via the self-centering magnetic interconnect with a 1.0 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSHIFTS 3000K TO 2200K\u003c\/strong\u003e — 3\/4 CTO color filter shifts a 3000 K Soraa narrow-spot lamp down to 2200K for a warmer, more candle-like output without changing the lamp or recalibrating the fixture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 MIRED SHIFT\u003c\/strong\u003e — Calibrated 120-mired shift, precise enough for hospitality and restaurant brands that specify their warm-end correlated color temperature down to a target spec.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWARM-DIM AESTHETIC\u003c\/strong\u003e — Use in hospitality and restaurant applications to simulate warm-dimming behavior and create custom colors for festive occasions or seasonal brand campaigns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eONE LAMP, MULTIPLE CCTS\u003c\/strong\u003e — A single 3000K Soraa lamp SKU can be used to deliver multiple color temperatures across a venue by stacking different CCT shifter SNAPs on different fixtures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 60% of the lamp's lumens through the filter so the warm-shifted output stays usable for accent, dining, and lounge zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any 4-inch Soraa SNAP-compatible lamp with a 1.0 lb-F holding force — no clips, no tools, no field modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTACK CCT SHIFTER FIRST\u003c\/strong\u003e — When combining with beam-shaping SNAPs, place the CCT shifter on the lamp first and add the beam-shaping accessory on top for the cleanest stacked optical result.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492855697579,"sku":null,"price":13.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-CC-0003-00-S1_70893fda-83ed-454d-87ae-2e0e7eda988c.jpg?v=1777248658"},{"product_id":"soraa-194","title":"Soraa AC-E-GC-1717-00-S1 SORAA SNAP 4 inch diameter  Circular Beam Spreader 17°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 4-inch Circular Beam Spreader 17° widens a narrow-spot Soraa beam into a clean 17° circular distribution. By snapping a single SKU of narrow-spot lamp on site and adding the spreader, specifiers reduce the number of beam-angle SKUs they have to stock, shortening design and sales cycles and giving installers maximum flexibility right up to install. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 84 mm diameter, 3.1 mm-thick lens snaps onto any 4-inch Soraa SNAP-compatible lamp via the self-centering magnetic interconnect with a 1.0 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPREADS BEAM TO 17° —\u003c\/strong\u003e Widens a narrow-spot Soraa beam into a clean 17° circular distribution suitable for accent, display, or general illumination across retail, gallery, and hospitality fixtures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eREDUCES BEAM-ANGLE SKUS —\u003c\/strong\u003e Lets specifiers stock a single narrow-spot lamp SKU and dial in the final beam angle on site by snapping on the optic, lowering both inventory costs and risk of stockouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEXIBILITY UNTIL INSTALL —\u003c\/strong\u003e Shortens specification, design, and sales cycles by leaving the final beam angle decision until the moment the lamp is installed in the fixture and aimed at the target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY —\u003c\/strong\u003e Passes 90% of the lamp's lumens through the lens, so spreading the beam does not cost meaningful output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT —\u003c\/strong\u003e Self-centering magnetic interconnect snaps onto any 4-inch Soraa SNAP-compatible lamp with a 1.0 lb-F holding force — no clips, no tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 3.1 MM BUILD —\u003c\/strong\u003e Just 3.1 mm thick at 84 mm diameter — sized for the 4-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS —\u003c\/strong\u003e Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492855730347,"sku":null,"price":6.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-E-GC-6060-00-S1_b82bc505-7b78-424f-81c8-f24b628dd63f.jpg?v=1777248607"},{"product_id":"soraa-195","title":"Soraa AC-E-GC-2525-00-S1 SORAA SNAP 4 inch diameter  Circular Beam Spreader 25°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\n  The Soraa SNAP 4-inch Circular Beam Spreader 25° widens a narrow-spot Soraa beam into a clean 25° circular distribution. By snapping a single SKU of narrow-spot lamp on site and adding the spreader, specifiers reduce the number of beam-angle SKUs they have to stock, shortening design and sales cycles and giving installers maximum flexibility right up to install. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 84 mm diameter, 3.1 mm-thick lens snaps onto any 4-inch Soraa SNAP-compatible lamp via the self-centering magnetic interconnect with a 1.0 lb-F holding force.\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eSPREADS BEAM TO 25° —\u003c\/strong\u003e\n    Widens a narrow-spot Soraa beam into a clean 25° circular distribution suitable for accent, display, or general illumination across retail, gallery, and hospitality fixtures.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eREDUCES BEAM-ANGLE SKUS —\u003c\/strong\u003e\n    Lets specifiers stock a single narrow-spot lamp SKU and dial in the final beam angle on site by snapping on the optic, lowering both inventory costs and risk of stockouts.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eFLEXIBILITY UNTIL INSTALL —\u003c\/strong\u003e\n    Shortens specification, design, and sales cycles by leaving the final beam angle decision until the moment the lamp is installed in the fixture and aimed at the target.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003e90% LUMEN TRANSMISSIVITY —\u003c\/strong\u003e\n    Passes 90% of the lamp's lumens through the lens, so spreading the beam does not cost meaningful output.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eMAGNETIC SNAP ATTACHMENT —\u003c\/strong\u003e\n    Self-centering magnetic interconnect snaps onto any 4-inch Soraa SNAP-compatible lamp with a 1.0 lb-F holding force — no clips, no tools.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eLOW-PROFILE 3.1 MM BUILD —\u003c\/strong\u003e\n    Just 3.1 mm thick at 84 mm diameter — sized for the 4-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eSTACKABLE WITH OTHER SNAPS —\u003c\/strong\u003e\n    Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\n  \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492855763115,"sku":null,"price":6.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-E-GC-6060-00-S1_7da7f355-e43d-4b7e-b3e1-bf21e370fb7d.jpg?v=1777248587"},{"product_id":"soraa-196","title":"Soraa AC-E-GC-3636-00-S1 SORAA SNAP 4 inch diameter  Circular Beam Spreader 36°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 4-inch Circular Beam Spreader 36° widens a narrow-spot Soraa beam into a clean 36° circular distribution. By snapping a single SKU of narrow-spot lamp on site and adding the spreader, specifiers reduce the number of beam-angle SKUs they have to stock, shortening design and sales cycles and giving installers maximum flexibility right up to install. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 84 mm diameter, 3.1 mm-thick lens snaps onto any 4-inch Soraa SNAP-compatible lamp via the self-centering magnetic interconnect with a 1.0 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSPREADS BEAM TO 36°\u003c\/strong\u003e — Widens a narrow-spot Soraa beam into a clean 36° circular distribution suitable for accent, display, or general illumination across retail, gallery, and hospitality fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eREDUCES BEAM-ANGLE SKUS\u003c\/strong\u003e — Lets specifiers stock a single narrow-spot lamp SKU and dial in the final beam angle on site by snapping on the optic, lowering both inventory costs and risk of stockouts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFLEXIBILITY UNTIL INSTALL\u003c\/strong\u003e — Shortens specification, design, and sales cycles by leaving the final beam angle decision until the moment the lamp is installed in the fixture and aimed at the target.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so spreading the beam does not cost meaningful output.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any 4-inch Soraa SNAP-compatible lamp with a 1.0 lb-F holding force — no clips, no tools.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 3.1 MM BUILD\u003c\/strong\u003e — Just 3.1 mm thick at 84 mm diameter — sized for the 4-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492855828651,"sku":null,"price":6.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-E-GC-6060-00-S1_f05ff426-87cc-4da7-b9b0-7c6200c0aa42.jpg?v=1777248558"},{"product_id":"soraa-197","title":"Soraa AC-E-GC-6060-00-S1 SORAA SNAP 4 inch diameter  Circular Beam Spreader 60°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 4-inch Circular Beam Spreader 60° widens a narrow-spot Soraa beam into a clean 60° circular distribution. By snapping a single SKU of narrow-spot lamp on site and adding the spreader, specifiers reduce the number of beam-angle SKUs they have to stock, shortening design and sales cycles and giving installers maximum flexibility right up to install. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 84 mm diameter, 3.1 mm-thick lens snaps onto any 4-inch Soraa SNAP-compatible lamp via the self-centering magnetic interconnect with a 1.0 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSPREADS BEAM TO 60°\u003c\/strong\u003e — Widens a narrow-spot Soraa beam into a clean 60° circular distribution suitable for accent, display, or general illumination across retail, gallery, and hospitality fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eREDUCES BEAM-ANGLE SKUS\u003c\/strong\u003e — Lets specifiers stock a single narrow-spot lamp SKU and dial in the final beam angle on site by snapping on the optic, lowering both inventory costs and risk of stockouts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFLEXIBILITY UNTIL INSTALL\u003c\/strong\u003e — Shortens specification, design, and sales cycles by leaving the final beam angle decision until the moment the lamp is installed in the fixture and aimed at the target.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so spreading the beam does not cost meaningful output.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any 4-inch Soraa SNAP-compatible lamp with a 1.0 lb-F holding force — no clips, no tools.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 3.1 MM BUILD\u003c\/strong\u003e — Just 3.1 mm thick at 84 mm diameter — sized for the 4-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492855894187,"sku":null,"price":6.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-E-GC-6060-00-S1.jpg?v=1777238081"},{"product_id":"soraa-198","title":"Soraa AC-E-GE-1036-00-S1 SORAA SNAP 4 inch diameter  Linear Beam Spreader 10° X 36°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 4-inch Linear Beam Spreader 10° x 36° reshapes a narrow-spot Soraa beam into an asymmetric linear pattern, ideal for wall washes and illuminating long or asymmetric objects. By spreading the beam into a 10° x 36° elongated footprint, it reduces the number of light fixtures required to cover a given run and limits spill onto adjacent surfaces. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 84 mm diameter, 3.1 mm-thick lens snaps onto any 4-inch Soraa SNAP-compatible lamp via the self-centering magnetic interconnect with a 1.0 lb-F holding force, and stacks with other SNAP accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLINEAR 10° X 36° BEAM\u003c\/strong\u003e — Reshapes a narrow-spot Soraa beam into a 10° x 36° elongated linear pattern, ideal for wall washes, signage, and asymmetric targets that a circular beam would over- or under-cover.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFEWER FIXTURES NEEDED\u003c\/strong\u003e — Spreading the beam linearly reduces the number of light fixtures required to cover a wall, art row, or display run, lowering both fixture and labor costs on a job.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCONTROLLED SPILL\u003c\/strong\u003e — Limits spill illumination onto adjacent surfaces, keeping the wash on the target object and out of unwanted ceiling, floor, or doorway areas.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so beam reshaping does not cost meaningful output.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any 4-inch Soraa SNAP-compatible lamp with a 1.0 lb-F holding force — no clips, no tools.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 3.1 MM BUILD\u003c\/strong\u003e — Just 3.1 mm thick at 84 mm diameter — sized for the 4-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492855926955,"sku":null,"price":13.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-E-GE-1036-00-S1.jpg?v=1777238017"},{"product_id":"soraa-199","title":"Soraa AC-E-GE-1060-00-S1 SORAA SNAP 4 inch diameter  Linear Beam Spreader 10° X 60°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 4-inch Linear Beam Spreader 10° x 60° reshapes a narrow-spot Soraa beam into an asymmetric linear pattern, ideal for wall washes and illuminating long or asymmetric objects. By spreading the beam into a 10° x 60° elongated footprint, it reduces the number of light fixtures required to cover a given run and limits spill onto adjacent surfaces. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 84 mm diameter, 3.1 mm-thick lens snaps onto any 4-inch Soraa SNAP-compatible lamp via the self-centering magnetic interconnect with a 1.0 lb-F holding force, and stacks with other SNAP accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLINEAR 10° X 60° BEAM\u003c\/strong\u003e — Reshapes a narrow-spot Soraa beam into a 10° x 60° elongated linear pattern, ideal for wall washes, signage, and asymmetric targets that a circular beam would over- or under-cover.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFEWER FIXTURES NEEDED\u003c\/strong\u003e — Spreading the beam linearly reduces the number of light fixtures required to cover a wall, art row, or display run, lowering both fixture and labor costs on a job.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCONTROLLED SPILL\u003c\/strong\u003e — Limits spill illumination onto adjacent surfaces, keeping the wash on the target object and out of unwanted ceiling, floor, or doorway areas.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so beam reshaping does not cost meaningful output.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any 4-inch Soraa SNAP-compatible lamp with a 1.0 lb-F holding force — no clips, no tools.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 3.1 MM BUILD\u003c\/strong\u003e — Just 3.1 mm thick at 84 mm diameter — sized for the 4-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492855959723,"sku":null,"price":13.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-E-GE-1060-00-S1.jpg?v=1777237952"},{"product_id":"soraa-200","title":"Soraa AC-E-FR-3636-00-S1 SORAA SNAP 4 inch diameter  Flat Top 36° X 36°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 4-inch Flat Top 36° x 36° reshapes a narrow-spot Soraa beam into an even square pool of light from center to edge. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output while eliminating the bright hot-spot that causes video camera saturation. That makes it a strong fit for critical video surveillance, broadcast sets, retail merchandising, and any application that needs uniform field illumination across a defined 36° x 36° square area. The 84 mm diameter, 3.1 mm-thick lens snaps onto any 4-inch Soraa SNAP-compatible lamp and stacks with other SNAP accessories for layered beam control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEVEN 36° X 36° FIELD\u003c\/strong\u003e — Provides flat 36° x 36° square illumination from center to edge, replacing the typical hot-spot of a narrow-spot beam with a uniform pool of light.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVIDEO-FRIENDLY OUTPUT\u003c\/strong\u003e — Eliminates video camera saturation, making the lens a fit for critical video surveillance, security cameras, and on-camera scenes that demand even field illumination.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so beam reshaping does not cost meaningful output, and the source's full performance reaches the target.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any 4-inch Soraa SNAP-compatible lamp — no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 3.1 MM BUILD\u003c\/strong\u003e — Just 3.1 mm thick at 84 mm diameter — sized for the 4-inch SNAP optical platform without adding visible bulk to recessed cans, track heads, or display fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, beam spreaders, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eINTEGRATED LED ACCESSORY\u003c\/strong\u003e — The award-winning SNAP SYSTEM is the first LED lamp\/accessory solution optimized to work as an integrated system, built on Soraa's GaN-on-GaN LED technology.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856058027,"sku":null,"price":13.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-E-FR-3636-00-S1.jpg?v=1777237875"},{"product_id":"soraa-201","title":"Soraa AC-E-LU-4040-00-S1 SORAA SNAP 4 inch diameter  Louver 40°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 4-inch Louver 40° is a glare-control accessory that snaps directly onto any 4-inch Soraa SNAP-compatible LED lamp. With a 40° cutoff angle, it eliminates high-angle glare and lets the light beam visually disappear in downlight applications, so visitors see the lit object instead of the LED source. The 84 mm diameter, 9 mm-thick louver attaches via Soraa's self-centering magnetic interconnect with a 1.0 lb-F holding force, and stacks with other SNAP accessories for layered beam control. A practical fix for retail, gallery, and hospitality downlights where direct view of the LED needs to be hidden from sightlines across the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003e40° CUTOFF FOR GLARE CONTROL\u003c\/strong\u003e — The 40° cutoff angle eliminates high-angle glare, making the light beam visually disappear in downlight applications and keeping the LED source out of the viewer's sightline.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps directly onto any 4-inch Soraa SNAP-compatible lamp; a 1.0 lb-F holding force keeps the louver seated without clips, tape, or tools.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 9 MM BUILD\u003c\/strong\u003e — 9 mm thick at 84 mm diameter, sized for the 4-inch SNAP optical platform used across larger-format Soraa narrow-spot lamps.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE SNAP ACCESSORY\u003c\/strong\u003e — Can be combined with beam spreaders or CCT-shifting SNAP accessories on the same lamp; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRETAIL \u0026amp; HOSPITALITY READY\u003c\/strong\u003e — Designed for the accent and display lighting Soraa lamps are specified in stores, hotels, restaurants, and museums where guests would otherwise look directly into the LED.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTOOL-FREE INSTALLATION\u003c\/strong\u003e — Snaps on and off the lamp by hand, so glare fixes and lighting tweaks on a job site take seconds instead of relamping or pulling fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eINTEGRATED LED ACCESSORY\u003c\/strong\u003e — The award-winning SNAP SYSTEM is the first LED lamp\/accessory solution optimized to work as an integrated system, built on Soraa's GaN-on-GaN LED technology.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856090795,"sku":null,"price":13.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/Img01_16123915-f98c-4614-8316-be7a83290408.jpg?v=1781522747"},{"product_id":"soraa-202","title":"Soraa AC-E-AM-0020-00-S1 SORAA SNAP 4 inch diameter  Aimable (Pair)","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 4-inch Aimable (Pair) lets specifiers and contractors redirect a Soraa narrow-spot LED beam without moving the fixture. Designed with two lenses, the Aim Snap bends the beam from 0° to a maximum deflection angle of 20° while keeping color and beam shape uniform across the throw. Built for the 4-inch SNAP magnetic interconnect, it attaches to any 4-inch SNAP-compatible Soraa lamp in seconds and stacks with other SNAP accessories for layered beam control. Ideal for retail, gallery, hospitality, and museum lighting where precise on-axis aiming is needed but the fixture geometry — recessed cans, fixed track heads — cannot be tilted on site.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBEAM AIMING TO 20°\u003c\/strong\u003e — Two-lens Aim Snap design tilts the beam from 0° up to a 20° maximum deflection angle, redirecting light onto a wall, display, or product face without moving the lamp itself.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUNIFORM COLOR \u0026amp; SHAPE\u003c\/strong\u003e — Maintains consistent color and beam shape across the full deflection range, so aimed light still reads as clean, on-axis Soraa output rather than a smeared off-axis beam.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e13° NATIVE BEAM\u003c\/strong\u003e — Works on Soraa narrow-spot 4-inch sources and produces a 13° native beam angle through the lens, keeping the aimed light tight enough for accent and display work.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e85% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 85% of the lamp's lumens through both lenses, so most of the source output reaches the target even after a full 20° deflection.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — The SNAP system's self-centering magnetic interconnect snaps the accessory directly onto any 4-inch Soraa SNAP-compatible lamp — no tools, no clips, no field modifications.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Can be combined with beam-shaping or CCT-shifting SNAP accessories on the same lamp; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSUPPLIED AS A PAIR\u003c\/strong\u003e — Each SKU is one Aimable pair, so the two lenses can work together to produce the deflected beam on a single 4-inch source.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856221867,"sku":null,"price":12.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-E-AM-0020-00-S1.jpg?v=1777237685"},{"product_id":"soraa-204","title":"Soraa AC-E-CL-0000-00-S1 SORAA SNAP 4 inch diameter  Color Filter Clear","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 4-inch Color Filter Clear is a clear-glass SNAP accessory designed to combine with gel and dichroic filters for total color freedom. The Clear SNAP gives specifiers a stable, magnet-mounted carrier for layering custom color effects on a Soraa narrow-spot LED lamp without modifying the fixture. With 93% lumen transmissivity at one SNAP (and 87% when stacked with a second), the 84 mm diameter, 3.1 mm-thick lens preserves nearly all of the lamp's output. It snaps onto any Soraa 4-inch SNAP-compatible lamp via a 1.0 lb-F magnetic interconnect and stacks with other SNAP accessories for layered beam and color control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCARRIER FOR GEL \u0026amp; DICHROIC\u003c\/strong\u003e — Use the Clear SNAP together with gel and dichroic filters for total color freedom, producing the exact mood and effect for any environment.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e93% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 93% of the lamp's lumens through a single Clear SNAP and 87% when stacked with a second SNAP, preserving the source's full performance.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any 4-inch Soraa SNAP-compatible lamp with a 1.0 lb-F holding force — no clips, no tools.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with beam-shaping or CCT-shifting SNAP accessories on the same lamp; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 3.1 MM BUILD\u003c\/strong\u003e — Just 3.1 mm thick at 84 mm diameter — sized for the 4-inch SNAP optical platform without adding visible bulk to the fixture.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRETAIL \u0026amp; GALLERY READY\u003c\/strong\u003e — Designed for the kind of accent and display lighting Soraa lamps are specified for — stores, hotels, restaurants, museums, and on-camera applications where color treatment matters.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eINTEGRATED LED ACCESSORY\u003c\/strong\u003e — The award-winning SNAP SYSTEM is the first LED lamp\/accessory solution optimized to work as an integrated system, built on Soraa's high-brightness, single-source GaN-on-GaN LED technology.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856287403,"sku":null,"price":6.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-E-CL-0000-00-S1.jpg?v=1777237519"},{"product_id":"soraa-205","title":"Soraa AC-CC-0001-00-S1 SORAA SNAP 2 inch diameter  Color Filter 1\/4 CTO 3000K to 2700K","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 2-inch Color Filter 1\/4 CTO shifts a narrow-spot Soraa lamp's correlated color temperature from 3000K down to 2700K for a warmer, more candle-like output. The 37-mired CCT shifter is built for hospitality and restaurant applications where warm dimming aesthetics are required, and lets a single 3000 K lamp SKU cover multiple color temperatures across a venue. Lumen transmissivity through the filter is 90%. The 50 mm diameter, 2 mm-thick lens snaps onto any narrow-spot Soraa lamp via the self-centering magnetic interconnect with a 0.45 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSHIFTS 3000K TO 2700K\u003c\/strong\u003e — 1\/4 CTO color filter shifts a 3000 K Soraa narrow-spot lamp down to 2700K for a warmer, more candle-like output without changing the lamp itself or recalibrating the fixture.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e37 MIRED SHIFT\u003c\/strong\u003e — Calibrated 37-mired shift, precise enough for hospitality and restaurant brands that specify their warm-end correlated color temperature down to a target spec.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWARM-DIM AESTHETIC\u003c\/strong\u003e — Use in hospitality and restaurant applications to simulate warm-dimming behavior and create custom colors for festive occasions or seasonal brand campaigns.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eONE LAMP, MULTIPLE CCTS\u003c\/strong\u003e — A single 3000 K Soraa lamp SKU can be used to deliver multiple color temperatures across a venue by stacking different CCT shifter SNAPs on different fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the filter so the warm-shifted output stays usable for accent, dining, and lounge zones.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any narrow-spot Soraa lamp with a 0.45 lb-F holding force — no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACK CCT SHIFTER FIRST\u003c\/strong\u003e — When combining with beam-shaping SNAPs, place the CCT shifter on the lamp first and add the beam-shaping accessory on top for the cleanest stacked optical result.\u003c\/li\u003e\n    \u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856320171,"sku":null,"price":8.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-CC-0001-00-S1.jpg?v=1777237436"},{"product_id":"soraa-206","title":"Soraa AC-CC-0002-00-S1 SORAA SNAP 2 inch diameter  Color Filter 1\/2 CTO 3000K to 2400K","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 2-inch Color Filter 1\/2 CTO shifts a narrow-spot Soraa lamp's correlated color temperature from 3000K down to 2400K for a warmer, more candle-like output. The 83-mired CCT shifter is built for hospitality and restaurant applications where warm dimming aesthetics are required, and lets a single 3000 K lamp SKU cover multiple color temperatures across a venue. Lumen transmissivity through the filter is 75%. The 50 mm diameter, 2 mm-thick lens snaps onto any narrow-spot Soraa lamp via the self-centering magnetic interconnect with a 0.45 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSHIFTS 3000K TO 2400K\u003c\/strong\u003e — 1\/2 CTO color filter shifts a 3000 K Soraa narrow-spot lamp down to 2400K for a warmer, more candle-like output without changing the lamp itself or recalibrating the fixture.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e83 MIRED SHIFT\u003c\/strong\u003e — Calibrated 83-mired shift, precise enough for hospitality and restaurant brands that specify their warm-end correlated color temperature down to a target spec.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWARM-DIM AESTHETIC\u003c\/strong\u003e — Use in hospitality and restaurant applications to simulate warm-dimming behavior and create custom colors for festive occasions or seasonal brand campaigns.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eONE LAMP, MULTIPLE CCTS\u003c\/strong\u003e — A single 3000 K Soraa lamp SKU can be used to deliver multiple color temperatures across a venue by stacking different CCT shifter SNAPs on different fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e75% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 75% of the lamp's lumens through the filter so the warm-shifted output stays usable for accent, dining, and lounge zones.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any narrow-spot Soraa lamp with a 0.45 lb-F holding force — no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACK CCT SHIFTER FIRST\u003c\/strong\u003e — When combining with beam-shaping SNAPs, place the CCT shifter on the lamp first and add the beam-shaping accessory on top for the cleanest stacked optical result.\u003c\/li\u003e\n    \u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856352939,"sku":null,"price":8.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-CC-0002-00-S1.jpg?v=1777237371"},{"product_id":"soraa-207","title":"Soraa AC-CC-0003-00-S1 SORAA SNAP 2 inch diameter  Color Filter 3\/4 CTO 3000K to 2200K","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 2-inch Color Filter 3\/4 CTO shifts a narrow-spot Soraa lamp's correlated color temperature from 3000K down to 2200K for a warmer, more candle-like output. The 120-mired CCT shifter is built for hospitality and restaurant applications where warm dimming aesthetics are required, and lets a single 3000 K lamp SKU cover multiple color temperatures across a venue. Lumen transmissivity through the filter is 60%. The 50 mm diameter, 2 mm-thick lens snaps onto any narrow-spot Soraa lamp via the self-centering magnetic interconnect with a 0.45 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSHIFTS 3000K TO 2200K\u003c\/strong\u003e — 3\/4 CTO color filter shifts a 3000 K Soraa narrow-spot lamp down to 2200K for a warmer, more candle-like output without changing the lamp itself or recalibrating the fixture.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e120 MIRED SHIFT\u003c\/strong\u003e — Calibrated 120-mired shift, precise enough for hospitality and restaurant brands that specify their warm-end correlated color temperature down to a target spec.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWARM-DIM AESTHETIC\u003c\/strong\u003e — Use in hospitality and restaurant applications to simulate warm-dimming behavior and create custom colors for festive occasions or seasonal brand campaigns.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eONE LAMP, MULTIPLE CCTS\u003c\/strong\u003e — A single 3000 K Soraa lamp SKU can be used to deliver multiple color temperatures across a venue by stacking different CCT shifter SNAPs on different fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e60% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 60% of the lamp's lumens through the filter so the warm-shifted output stays usable for accent, dining, and lounge zones.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any narrow-spot Soraa lamp with a 0.45 lb-F holding force — no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACK CCT SHIFTER FIRST\u003c\/strong\u003e — When combining with beam-shaping SNAPs, place the CCT shifter on the lamp first and add the beam-shaping accessory on top for the cleanest stacked optical result.\u003c\/li\u003e\n    \u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856385707,"sku":null,"price":8.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-CC-0003-00-S1.jpg?v=1777237307"},{"product_id":"soraa-208","title":"Soraa AC-GC-1717-00-S1 SORAA SNAP 2 inch diameter  Circular Beam Spreader 17°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 2-inch Circular Beam Spreader 17° widens a narrow-spot Soraa beam into a clean 17° circular distribution. By snapping a single SKU of narrow-spot lamp on site and adding the spreader, specifiers reduce the number of beam-angle SKUs they have to stock, shortening design and sales cycles and giving installers maximum flexibility right up to install. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 50 mm diameter, 2 mm-thick lens snaps onto any narrow-spot Soraa lamp via the self-centering magnetic interconnect with a 0.45 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSPREADS BEAM TO 17°\u003c\/strong\u003e — Widens a narrow-spot Soraa beam into a clean 17° circular distribution suitable for accent, display, or general illumination across retail, gallery, and hospitality fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eREDUCES BEAM-ANGLE SKUS\u003c\/strong\u003e — Lets specifiers stock a single narrow-spot lamp SKU and dial in the final beam angle on site by snapping on the optic, lowering both inventory costs and risk of stockouts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFLEXIBILITY UNTIL INSTALL\u003c\/strong\u003e — Shortens specification, design, and sales cycles by leaving the final beam angle decision until the moment the lamp is installed in the fixture and aimed at the target.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so spreading the beam does not cost meaningful output.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any narrow-spot Soraa lamp with a 0.45 lb-F holding force — no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 2 MM BUILD\u003c\/strong\u003e — Just 2 mm thick at 50 mm diameter — sized for the 2-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856418475,"sku":null,"price":5.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-GC-3636-00-S1_e5623685-91da-4ed5-8b24-369968e53bd8.jpg?v=1777237210"},{"product_id":"soraa-209","title":"Soraa AC-GC-2525-00-S1 SORAA SNAP 2 inch diameter  Circular Beam Spreader 25°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 2-inch Circular Beam Spreader 25° widens a narrow-spot Soraa beam into a clean 25° circular distribution. By snapping a single SKU of narrow-spot lamp on site and adding the spreader, specifiers reduce the number of beam-angle SKUs they have to stock, shortening design and sales cycles and giving installers maximum flexibility right up to install. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 50 mm diameter, 2 mm-thick lens snaps onto any narrow-spot Soraa lamp via the self-centering magnetic interconnect with a 0.45 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSPREADS BEAM TO 25°\u003c\/strong\u003e — Widens a narrow-spot Soraa beam into a clean 25° circular distribution suitable for accent, display, or general illumination across retail, gallery, and hospitality fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eREDUCES BEAM-ANGLE SKUS\u003c\/strong\u003e — Lets specifiers stock a single narrow-spot lamp SKU and dial in the final beam angle on site by snapping on the optic, lowering both inventory costs and risk of stockouts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFLEXIBILITY UNTIL INSTALL\u003c\/strong\u003e — Shortens specification, design, and sales cycles by leaving the final beam angle decision until the moment the lamp is installed in the fixture and aimed at the target.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so spreading the beam does not cost meaningful output.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any narrow-spot Soraa lamp with a 0.45 lb-F holding force — no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 2 MM BUILD\u003c\/strong\u003e — Just 2 mm thick at 50 mm diameter — sized for the 2-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856451243,"sku":null,"price":5.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-GC-3636-00-S1_0bae0f39-8065-40c9-a38b-6a15c4a88a5d.jpg?v=1777237186"},{"product_id":"soraa-210","title":"Soraa AC-GC-3636-00-S1 SORAA SNAP 2 inch diameter  Circular Beam Spreader 36°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 2-inch Circular Beam Spreader 36° widens a narrow-spot Soraa beam into a clean 36° circular distribution. By snapping a single SKU of narrow-spot lamp on site and adding the spreader, specifiers reduce the number of beam-angle SKUs they have to stock, shortening design and sales cycles and giving installers maximum flexibility right up to install. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 50 mm diameter, 2 mm-thick lens snaps onto any narrow-spot Soraa lamp via the self-centering magnetic interconnect with a 0.45 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSPREADS BEAM TO 36°\u003c\/strong\u003e — Widens a narrow-spot Soraa beam into a clean 36° circular distribution suitable for accent, display, or general illumination across retail, gallery, and hospitality fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eREDUCES BEAM-ANGLE SKUS\u003c\/strong\u003e — Lets specifiers stock a single narrow-spot lamp SKU and dial in the final beam angle on site by snapping on the optic, lowering both inventory costs and risk of stockouts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFLEXIBILITY UNTIL INSTALL\u003c\/strong\u003e — Shortens specification, design, and sales cycles by leaving the final beam angle decision until the moment the lamp is installed in the fixture and aimed at the target.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so spreading the beam does not cost meaningful output.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any narrow-spot Soraa lamp with a 0.45 lb-F holding force — no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 2 MM BUILD\u003c\/strong\u003e — Just 2 mm thick at 50 mm diameter — sized for the 2-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856484011,"sku":null,"price":5.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-GC-3636-00-S1.jpg?v=1777236739"},{"product_id":"soraa-211","title":"Soraa AC-GC-6060-00-S1 SORAA SNAP 2 inch diameter  Circular Beam Spreader 60°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 2-inch Circular Beam Spreader 60° widens a narrow-spot Soraa beam into a clean 60° circular distribution. By snapping a single SKU of narrow-spot lamp on site and adding the spreader, specifiers reduce the number of beam-angle SKUs they have to stock, shortening design and sales cycles and giving installers maximum flexibility right up to install. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 50 mm diameter, 2 mm-thick lens snaps onto any narrow-spot Soraa lamp via the self-centering magnetic interconnect with a 0.45 lb-F holding force.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSPREADS BEAM TO 60°\u003c\/strong\u003e — Widens a narrow-spot Soraa beam into a clean 60° circular distribution suitable for accent, display, or general illumination across retail, gallery, and hospitality fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eREDUCES BEAM-ANGLE SKUS\u003c\/strong\u003e — Lets specifiers stock a single narrow-spot lamp SKU and dial in the final beam angle on site by snapping on the optic, lowering both inventory costs and risk of stockouts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFLEXIBILITY UNTIL INSTALL\u003c\/strong\u003e — Shortens specification, design, and sales cycles by leaving the final beam angle decision until the moment the lamp is installed in the fixture and aimed at the target.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so spreading the beam does not cost meaningful output.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any narrow-spot Soraa lamp with a 0.45 lb-F holding force — no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 2 MM BUILD\u003c\/strong\u003e — Just 2 mm thick at 50 mm diameter — sized for the 2-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856516779,"sku":null,"price":5.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-GC-6060-00-S1.jpg?v=1777236671"},{"product_id":"soraa-212","title":"Soraa AC-GE-1025-00-S1 SORAA SNAP 2 inch diameter  Linear Beam Spreader 10° X 25°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 2-inch Linear Beam Spreader 10° x 25° reshapes a narrow-spot Soraa beam into an asymmetric linear pattern, ideal for wall washes and illuminating long or asymmetric objects. By spreading the beam into a 10° x 25° elongated footprint, it reduces the number of light fixtures required to cover a given run and limits spill onto adjacent surfaces. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 50 mm diameter, 2 mm-thick lens snaps onto any narrow-spot Soraa lamp via the self-centering magnetic interconnect with a 0.45 lb-F holding force, and stacks with other SNAP accessories for layered beam control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLINEAR 10° X 25° BEAM\u003c\/strong\u003e — Reshapes a narrow-spot Soraa beam into a 10° x 25° elongated linear pattern, ideal for wall washes, signage, and asymmetric targets that a circular beam would over- or under-cover.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFEWER FIXTURES NEEDED\u003c\/strong\u003e — Spreading the beam linearly reduces the number of light fixtures required to cover a wall, art row, or display run, lowering both fixture and labor costs on a job.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCONTROLLED SPILL\u003c\/strong\u003e — Limits spill illumination onto adjacent surfaces, keeping the wash on the target object and out of unwanted ceiling, floor, or doorway areas.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so beam reshaping does not cost meaningful output.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any narrow-spot Soraa lamp with a 0.45 lb-F holding force — no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 2 MM BUILD\u003c\/strong\u003e — Just 2 mm thick at 50 mm diameter — sized for the 2-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856549547,"sku":null,"price":8.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-GE-1060-00-S1_713dd65d-8313-4f4d-af62-8d6b64b9f7f8.jpg?v=1777236572"},{"product_id":"soraa-213","title":"Soraa AC-GE-1036-00-S1 SORAA SNAP 2 inch diameter  Linear Beam Spreader 10° X 36°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 2-inch Linear Beam Spreader 10° x 36° reshapes a narrow-spot Soraa beam into an asymmetric linear pattern, ideal for wall washes and illuminating long or asymmetric objects. By spreading the beam into a 10° x 36° elongated footprint, it reduces the number of light fixtures required to cover a given run and limits spill onto adjacent surfaces. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 50 mm diameter, 2 mm-thick lens snaps onto any narrow-spot Soraa lamp via the self-centering magnetic interconnect with a 0.45 lb-F holding force, and stacks with other SNAP accessories for layered beam control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLINEAR 10° X 36° BEAM\u003c\/strong\u003e — Reshapes a narrow-spot Soraa beam into a 10° x 36° elongated linear pattern, ideal for wall washes, signage, and asymmetric targets that a circular beam would over- or under-cover.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFEWER FIXTURES NEEDED\u003c\/strong\u003e — Spreading the beam linearly reduces the number of light fixtures required to cover a wall, art row, or display run, lowering both fixture and labor costs on a job.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCONTROLLED SPILL\u003c\/strong\u003e — Limits spill illumination onto adjacent surfaces, keeping the wash on the target object and out of unwanted ceiling, floor, or doorway areas.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so beam reshaping does not cost meaningful output.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any narrow-spot Soraa lamp with a 0.45 lb-F holding force — no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 2 MM BUILD\u003c\/strong\u003e — Just 2 mm thick at 50 mm diameter — sized for the 2-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856582315,"sku":null,"price":8.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-GE-1060-00-S1_2f2e92ae-5020-43bd-9577-67e3f7dbbbb4.jpg?v=1777236542"},{"product_id":"soraa-214","title":"Soraa AC-GE-1060-00-S1 SORAA SNAP 2 inch diameter  Linear Beam Spreader 10° X 60°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 2-inch Linear Beam Spreader 10° x 60° reshapes a narrow-spot Soraa beam into an asymmetric linear pattern, ideal for wall washes and illuminating long or asymmetric objects. By spreading the beam into a 10° x 60° elongated footprint, it reduces the number of light fixtures required to cover a given run and limits spill onto adjacent surfaces. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output. The 50 mm diameter, 2 mm-thick lens snaps onto any narrow-spot Soraa lamp via the self-centering magnetic interconnect with a 0.45 lb-F holding force, and stacks with other SNAP accessories for layered beam control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLINEAR 10° X 60° BEAM\u003c\/strong\u003e — Reshapes a narrow-spot Soraa beam into a 10° x 60° elongated linear pattern, ideal for wall washes, signage, and asymmetric targets that a circular beam would over- or under-cover.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFEWER FIXTURES NEEDED\u003c\/strong\u003e — Spreading the beam linearly reduces the number of light fixtures required to cover a wall, art row, or display run, lowering both fixture and labor costs on a job.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCONTROLLED SPILL\u003c\/strong\u003e — Limits spill illumination onto adjacent surfaces, keeping the wash on the target object and out of unwanted ceiling, floor, or doorway areas.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so beam reshaping does not cost meaningful output.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any narrow-spot Soraa lamp with a 0.45 lb-F holding force — no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 2 MM BUILD\u003c\/strong\u003e — Just 2 mm thick at 50 mm diameter — sized for the 2-inch SNAP optical platform without adding visible bulk to recessed cans or track heads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, color filters, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856615083,"sku":null,"price":8.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-GE-1060-00-S1.jpg?v=1777236495"},{"product_id":"soraa-215","title":"Soraa AC-FR-2525-00-S1 SORAA SNAP 2 inch diameter  Flat Top 25° X 25°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 2-inch Flat Top 25° x 25° reshapes a narrow-spot Soraa beam into an even square pool of light from center to edge. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output while eliminating the bright hot-spot that causes video camera saturation. That makes it a strong fit for critical video surveillance, broadcast sets, retail merchandising, and any application that needs uniform field illumination across a defined 25° x 25° square area. The 50 mm diameter, 2 mm-thick lens snaps onto any narrow-spot Soraa lamp via the self-centering magnetic interconnect with a 0.45 lb-F holding force, and stacks with other SNAP accessories for layered beam control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEVEN 25° X 25° FIELD\u003c\/strong\u003e — Provides flat 25° x 25° square illumination from center to edge, replacing the typical hot-spot of a narrow-spot beam with a uniform pool of light.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVIDEO-FRIENDLY OUTPUT\u003c\/strong\u003e — Eliminates video camera saturation, making the lens a fit for critical video surveillance, security cameras, and on-camera scenes that demand even field illumination.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so beam reshaping does not cost meaningful output, and the source's full performance reaches the target.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any narrow-spot Soraa lamp with a 0.45 lb-F holding force; no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 2 MM BUILD\u003c\/strong\u003e — Just 2 mm thick at 50 mm diameter; sized for the 2-inch SNAP optical platform without adding visible bulk to recessed cans, track heads, or display fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, beam spreaders, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eINTEGRATED LED ACCESSORY\u003c\/strong\u003e — The award-winning SNAP SYSTEM is the first LED lamp\/accessory solution optimized to work as an integrated system, built on Soraa's GaN-on-GaN LED technology.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856647851,"sku":null,"price":8.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-FR-3636-00-S1_44f6d500-658e-4129-aaf2-084360236f44.jpg?v=1777236406"},{"product_id":"soraa-216","title":"Soraa AC-FR-3636-00-S1 SORAA SNAP 2 inch diameter  Flat Top 36° X 36°","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Soraa SNAP 2-inch Flat Top 36° x 36° reshapes a narrow-spot Soraa beam into an even square pool of light from center to edge. With 90% lumen transmissivity, the lens preserves nearly all of the lamp's output while eliminating the bright hot-spot that causes video camera saturation. That makes it a strong fit for critical video surveillance, broadcast sets, retail merchandising, and any application that needs uniform field illumination across a defined square area. The 50 mm diameter, 2 mm-thick lens snaps onto any narrow-spot Soraa lamp via the self-centering magnetic interconnect with a 0.45 lb-F holding force, and stacks with other SNAP accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout This Item\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEVEN 36° X 36° FIELD\u003c\/strong\u003e — Provides flat 36° x 36° square illumination from center to edge, replacing the typical hot-spot of a narrow-spot beam with a uniform pool of light.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVIDEO-FRIENDLY OUTPUT\u003c\/strong\u003e — Eliminates video camera saturation, making the lens a fit for critical video surveillance, security cameras, and on-camera scenes that demand even field illumination.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e90% LUMEN TRANSMISSIVITY\u003c\/strong\u003e — Passes 90% of the lamp's lumens through the lens, so beam reshaping does not cost meaningful output, and the source's full performance reaches the target.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMAGNETIC SNAP ATTACHMENT\u003c\/strong\u003e — Self-centering magnetic interconnect snaps onto any narrow-spot Soraa lamp with a 0.45 lb-F holding force — no clips, no tools, no field modifications required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLOW-PROFILE 2 MM BUILD\u003c\/strong\u003e — Just 2 mm thick at 50 mm diameter — sized for the 2-inch SNAP optical platform without adding visible bulk to recessed cans, track heads, or display fixtures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTACKABLE WITH OTHER SNAPS\u003c\/strong\u003e — Combine with louvers, beam spreaders, or CCT-shifting SNAP accessories for layered beam control; place CCT shifters on the lamp first for best results.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eINTEGRATED LED ACCESSORY\u003c\/strong\u003e — The award-winning SNAP SYSTEM is the first LED lamp\/accessory solution optimized to work as an integrated system, built on Soraa's GaN-on-GaN LED technology.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SORAA","offers":[{"title":"Default Title","offer_id":46492856680619,"sku":null,"price":8.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/files\/AC-FR-3636-00-S1.jpg?v=1777236378"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1235\/2902\/collections\/soraa_vivid.jpg?v=1785919448","url":"https:\/\/www.payless-4-lighting.com\/collections\/soraa-vivid.oembed?page=2","provider":"Payless4Lighting","version":"1.0","type":"link"}